Camera Systems (CCTV) (Webinar and In-Person)

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours - CRSE2608-0015- Power-and-Data Cabling: PoE, LP Cables & Bundling Under 722.140; The ampacity tables behind every PoE camera you hang: bundle sizes, temperature corrections, the 0.3-amp exception, LP cables and their markings, and an introduction to the new Class 4 fault-managed power systems.  This class meets the State requirement for Code hours.

4 CEU Hours - Video Surveillance Systems: Design, Installation & Field Practices; This 4-hour course builds a surveillance system that holds up: cameras, lenses, and imaging fundamentals in the first half — recording, networks, and installation craft in the second. Coverage design, light and darkness, storage math, and the field habits that keep video usable when it matters.

This course is designed for Power Limited Technicians (PLT), Registered Unlicensed RT/RE, and other licensed electrical professionals who install, maintain, inspect, or design low-voltage and limited-energy systems.  This class meets the State requirement for Technical hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours - CRSE2608-0015- Power-and-Data Cabling: PoE, LP Cables & Bundling Under 722.140; The ampacity tables behind every PoE camera you hang: bundle sizes, temperature corrections, the 0.3-amp exception, LP cables and their markings, and an introduction to the new Class 4 fault-managed power systems.  This class meets the State requirement for Code hours.

4 CEU Hours - Video Surveillance Systems: Design, Installation & Field Practices; This 4-hour course builds a surveillance system that holds up: cameras, lenses, and imaging fundamentals in the first half — recording, networks, and installation craft in the second. Coverage design, light and darkness, storage math, and the field habits that keep video usable when it matters.

This course is designed for Power Limited Technicians (PLT), Registered Unlicensed RT/RE, and other licensed electrical professionals who install, maintain, inspect, or design low-voltage and limited-energy systems.  This class meets the State requirement for Technical hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours - CRSE2608-0015- Power-and-Data Cabling: PoE, LP Cables & Bundling Under 722.140; The ampacity tables behind every PoE camera you hang: bundle sizes, temperature corrections, the 0.3-amp exception, LP cables and their markings, and an introduction to the new Class 4 fault-managed power systems.  This class meets the State requirement for Code hours.

4 CEU Hours - CRSE2608-0017- Burglar Alarm System Design, Installation & Field Practices; This 4-hour course covers the whole burglar alarm system from the risk walk to the final walk test: control panels, zone circuits and end-of-line supervision, contacts, motion and glassbreak detection, wireless done honestly, keypads, communicators, programming against false alarms, and troubleshooting from a known baseline — plus the Minnesota license and municipal alarm ordinances that stand behind every job.

This course is designed for Power Limited Technicians (PLT), Registered Unlicensed RT/RE, and other licensed electrical professionals who install, maintain, inspect, or design low-voltage and limited-energy systems.  This class meets the State requirement for Technical hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours - CRSE2608-0015- Power-and-Data Cabling: PoE, LP Cables & Bundling Under 722.140; The ampacity tables behind every PoE camera you hang: bundle sizes, temperature corrections, the 0.3-amp exception, LP cables and their markings, and an introduction to the new Class 4 fault-managed power systems.  This class meets the State requirement for Code hours.

4 CEU Hours - Video Surveillance Systems: Design, Installation & Field Practices; This 4-hour course builds a surveillance system that holds up: cameras, lenses, and imaging fundamentals in the first half — recording, networks, and installation craft in the second. Coverage design, light and darkness, storage math, and the field habits that keep video usable when it matters.

This course is designed for Power Limited Technicians (PLT), Registered Unlicensed RT/RE, and other licensed electrical professionals who install, maintain, inspect, or design low-voltage and limited-energy systems.  This class meets the State requirement for Technical hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.

2 CEU Hours - CRSE2608-0015- Power-and-Data Cabling: PoE, LP Cables & Bundling Under 722.140; The ampacity tables behind every PoE camera you hang: bundle sizes, temperature corrections, the 0.3-amp exception, LP cables and their markings, and an introduction to the new Class 4 fault-managed power systems.  This class meets the State requirement for Code hours.

4 CEU Hours - CRSE2608-0017- Burglar Alarm System Design, Installation & Field Practices; This 4-hour course covers the whole burglar alarm system from the risk walk to the final walk test: control panels, zone circuits and end-of-line supervision, contacts, motion and glassbreak detection, wireless done honestly, keypads, communicators, programming against false alarms, and troubleshooting from a known baseline — plus the Minnesota license and municipal alarm ordinances that stand behind every job.

This course is designed for Power Limited Technicians (PLT), Registered Unlicensed RT/RE, and other licensed electrical professionals who install, maintain, inspect, or design low-voltage and limited-energy systems.  This class meets the State requirement for Technical hours.

2 CEU Hours -CRSE2608-0016- Communications & CCTV Circuits Under the 2026 NEC (Chapter 8); Chapter 8 lost its long-standing independence in 2026, and this class explains what that means on the job: premises cabling now under 722 and 723, protection under 742, entrance cables and the 50-foot rule, primary protectors, grounding, and lightning separation for camera and communications work. This class is also appropriate for the Registered Unlicensed Technician (RT/RE).  This class meets the State requirement for Code hours.