2 CEU Hours - 20210184 Advanced Burglar Alarms 2021; A sequel to Basic Burglar Alarm Detection and Operation; This class for the individual that has taken the Basic introduction class, or has at least 3 years’ experience in the field. Subjects include Device selection, Design and layout, Partitions and zones. This class meets the State requirement for technical hours.
4 CEU Hours – 20190202 Basic Burglar Alarm Installation 2019; This class covers installation and use including detection devices, programming options and features are part of this class. False alarm prevention including the CPO1 requirements as required by many communities has been added. A non-brand specific class for the moderately experienced alarm installer. This class meets the State requirement for technical hours.
2 CEU Hours -20190437 Basics for Telco and Cable 2020; This Class is an overview of the requirements for Grounding, Bonding, and general rules for wire and cable installations as well as best practices for termination and certification. This class meets the State requirement for Code hours.
2 CEU Hours - 20220069 Basics of Fire Alarms 2022; Non-Brand specific covering NFPA and Electrical code requirements for Fire alarms and fire reporting. Dealing with the AHJ and determining who the AHJ is. The liabilities and responsibilities for testing and reporting are also covered. This class meets the State requirement for technical hours.
2 CEU Hours – 20180659 Bonding For Communications Systems 250.94; This course is a 2 code hour CEU presentation for the Power Limited Tech as well as others concerned with Bonding Equipment and Bonding Ground Connections for Telephone, Cable system providers as well as Satellite and related technologies. This course is intended for inspectors, electricians, power limited technicians, unlicensed electrical workers and individuals involved with the installation of electrical systems for building and structures, the installation of communications services delivered via twisted pairs, coaxial cables, optical fibers, and those systems employing exterior-mounted antennas. This class meets the State requirement for Code hours.
2 CE Hours - 20210183 Chapter 8 References 2021; Other sections of the code do not apply to chapter 8 unless specifically referenced. This class covers the places that does reference other sections of the code, more than 37 places are referenced. This class meets the State requirement for Code hours.
4 CEU Hours – 20200332 Class 2 and Class 3 Circuits 2020; This class is a 4 hour CEU NEC code class. This class includes the changes and the additions to the code for 2017. Including the changes as they relate to PoE and other power and listing changes. Other topics include control and signal circuits, Circuit identification and installation requirements. This class meets the State requirement for Code hours.
2 CEU Hours - 2021 Environmental Monitoring 2021; This is a class for all individuals who are concerned about the new Carbon Monoxide law, as well as Smoke and other environmental concerns. This class meets the State requirement for technical hours.
2 CEU Hours – 20210440 Fire Stop 101 2022; This course is an important part of all installation projects. Proper fire stop is covered for new construction as well as retrofit applications. Definitions and terminology as practical applications and code requirements are covered. This class meets the State requirement for technical hours.
2 CEU Hours - 20200158 Fundamentals Of Relays 2020; An in depth look at the use of relays for signaling, and control wiring. Applications apply to HVAC, Alarm, and Communications. Bring your ideas and problems to class and let us work on a solution. This class meets the State requirement for technical hours.
4 CEU Hours - 20210188 Fundamentals of the NEC for the PLT 2021; This class is an expanded class of the Basic fundamental’s presentation including the development, Purpose and Structure of the National Electrical Code. The Chapters and the Articles that are specific to the Technology Contractor. This class meets the State requirement for Code hours.
2 CEU Hours - 20200009 Grounding & Bonding For Antenna Systems 2020; The Satellite Grounding and Bonding per the NEC 2020 edition is a comprehensive review of why we ground and Bond and what the UL and NEC requirements are for Antennae installations and coax distribution and Cable TV installations. This class meets the State requirement for Code hours.
2 CEU Hours - 20180486 Low Voltage Wiring 2018; This Class is an overview of Voice, Data, Audio, and Video Installation best practices, primarily with a Business emphasis. This class meets the State requirement for technical hours.
2 CEU Hours - 20200331 MN Rules 2020; An updated review of the Rules for Licensing and Inspection in Minnesota. Provides updated information on on-line renewal, CE requirements, and filing, deadline review and new fee schedules. This class meets the State requirement for Rules / Technical hours.
4 CEU Hours - 20210173 MN RULES FOR THE CONTRACTOR This class is a comprehensive class for the Responsible Person of Record for a Contractor’s License and any owners and managers of contracting companies. The responsibilities of individuals, License requirements and Inspections are discussed in depth. Who is responsible to supervise unlicensed individuals involved in Technology work? Renewal and Continuing Education requirements are covered as well. This class meets the State requirement for Rules / Technical hours.
2 CEU Hours - 20190539 NEC Chapter 1 Part 1 2020; National Electrical Code Chapter 1 part 1 is the first in a two part series designed for the Technician who has very little contact with Electrical equipment and installations. This class is also appropriate for the Registered Unlicensed Technician. This class meets the State requirement for Code hours.
2 CEU Hours - 20200348 NEC Chapter 1 Part 2 2020; National Electrical Code Chapter 1 part 2 is the second part in a two part series designed for the Technician who has very little contact with Electrical equipment and installations. This class is also appropriate for the Registered Unlicensed Technician. Irrigation installations are specifically referenced. This class meets the State requirement for Code hours.
4 CEU Hours - 20200101 NEC Article 500 2020; Classified Locations This Class is an overview of Hazardous or classified locations and the NEC requirements for installations. This class meets the State requirement for Code hours.
2 CEU Hours - 20200010 NEC Article 680 2020; This section of the code is what the Landscaping and irrigation people have been asking for, this part of the code is all about outdoor lighting and irrigation. Specific areas of interest are those with outdoor water features, pools, spas, fountains, and other man-made water features. Finally, a class for those industries. This class meets the State requirement for Code hours.
2 CEU Hours - 20190605 NEC Article 725 2020; The National Electrical Code chapters that relate to Class 1, 2, and 3 wiring. Related chapters such as Hazardous locations and Technology areas are referenced. This class meets the State requirement for Code hours.
2 CEU Hours – 20190707 NEC Article 760 2020; This class is all about Power limited fire alarm installations and, class 2, and Class 3 control and signaling circuits and installation practices that relate to PLFA and clear definitions of what is a Non-Power limited alarm system. This class meets the State requirement for Code hours.
2 CE Hours - 20190521 NEC ARTICLE 800 2020; Communications cabling installations with a high emphasis on Grounding, Bonding, and installation requirements. This class meets the State requirement for Code hours.
4 CEU Hours - 20200338 NEC CHAPTER 8 2020; This is an in depth review of Chapter 8 including Articles, 800 communications, 810, Antennae installation requirements, 820 Radio and Television Antennae’s, 830 Network powered broadband, and 840 Premise powered Broadband. This class meets the State requirement for Code hours.
2 CE Hours - 20190607 NEC CODE CHANGES 2020 PART 1; A review of Chapters, and articles 90, through 725 of the 2020 code book that most apply to Power Limited Technicians as well as Registered Unlicensed Techs. This class meets the State requirement for Code hours.
2 CE Hours - 20190604 NEC CODE CHANGES 2020 PART 2; A review of Chapters, and articles 760, through 840 of the 2020 code book that most apply to Power Limited Technicians as well as Registered Unlicensed Techs. This class meets the State requirement for Code hours.
2 CEU Hours - 20190508 NEC FUNDAMENTALS 2020; This class includes the purpose of the NEC and Locations that are covered, Definitions, installation restrictions for installations important to the Electrical industry along with licensing restrictions. This class meets the State requirement for Code hours.
4 CEU HOURS - 20210271 THE NEC IN PRACTICE AND PICTURES; This is a visual presentation with many pictures and examples of code requirements and violations. Many of the photos are courtesy of past attendees of our classes. This class meets the State requirement for Code hours.
4 CEU Hours - 20200127 THE NEC & THE PLT 2020: A comprehensive review of the sections of the code that has meaning to the PLT. A synopsis of NEC codes Chapter 1-5 based on the 2020 code This class meets the State requirement for Code hours.
4 CEU Hours – 20190580 THE PLT AND THE 2020 NEC PART 2; Highlighting additional parts of the code that concerns the installation of Technology Systems. This class meets the State requirement for Code hours.
4 CEU Hours - 20200512 OUTDOOR LIGHTING 2021; This class is a 4-hour class covering the design, layout, equipment requirements, voltage calculations, and aesthetic considerations for outdoor lighting. The various types of lighting are discussed including LED lighting and precautions and safety considerations. Sizing of power supplies and lamp wattages as well as wire sizes with calculation tables are included. This class meets the State requirement for technical hours.
2 CEU Hours - 20200233 SECURING & SUPPORTING 2020; Securing and supporting covers the rules for fastening cables and equipment in various environments. NEC Article 300.11 and the related articles in other articles are emphasized. With the inspectors looking at our work, let us do it in a workmanlike manner. This class meets the State requirement for Code hours.
Other Classes are available upon request. If you have a topic you think, we should cover please call or e-mail we will do our best to fill your request. This email address is being protected from spambots. You need JavaScript enabled to view it.
We are offering 2 new classes for the Satellite Installers. SBCA Satellite Sytems installers Class and the Satellite Installers Exam Prep Class. Follow this link to find out more on the SBCA classes.
Registered unlicensed RT/RE/RM classes are offered each month at the Roseville Location. Registered unlicensed may also register for part of any day scheduled for Licensed Technicians. It is important to keep in mind only those classes listed as NEC Code qualify for CEU’s for Unlicensed Registered Technicians.
"Continuing Education Credit's For The AJ, AM, EL, EM, PLT, SSI and RT/RE/RM " or "PLT Prep Exam Classes"
Our classes are the most reasonable, cost effective classes you will find. PLT Services accesses a data base on all attendees, so we can try and help you not duplicate classes in the same renewal period.
What does a full day cost? $185.00, Discounts apply for those who sign up for a second day when registering. A second day discount will apply if registration is done at the same time.
PLT SERVICES is a state approved Continuing Education training facility for the Power Limited Technician as well as Registered Unlicensed, electricians, satellite installers and HVAC contractors.*
Training is offered on a contract basis or through our regularly scheduled classes. Approval for all classes through the Department of Labor and Industry Electrical Division.
Classes are taught by Power Limited Technicians who actually work, or have worked in the field. Classes are relevant to the Power Limited Tech, not electricians. Classes are limited in size so you can ask the questions you need answers to. All of our regular instructors are Licensed Power Limited Technicians, and have a minimum of 28 years experience in their areas of expertise. PLT Services works with manufacturers, distributors, and dealers who have special talents they are willing to share. PLT Services has instructors available to us that train on specific subjects they are experts in. These classes are arranged special arrangements.
PLT services is a Department of Labor and Industry approved source for continuing education credits for the Power Limited Technician as well as other license holders in the electrical industry. PLT Services classes are designed to provide usable and valuable education not just fill chairs and take up your time. Our classes cover subjects that are important to the industry and enable the Power Limited contractor to expand there business. Required courses include National Electric Code based on the most current issue of the NEC Code book. The NEC Classes are specific to the areas of interest to the PLT and TSC Contractor.
PLT Services will come to you and provide classes to your entire company, allowing the contractor to save the cost of sending employees out of town to fulfill their CEU requirements. Our regularly scheduled classes are reasonably priced for the individual needing to renew their personal license. These classes are done by special special arrangements.
Some of the Classes PLT Services Offers:
- National Electrical Code Chapter 725 2020 and related Articles. This class covers Class 1,2,and 3 wiring and other specifically related issues.
- National Electrical code Chapter 800 2020. This class covers communications wiring and specifications. These classes both meet the 2 hour CEU minimum renewal requirement.
- NEC and The PLT, This Class covers the National Electrical Code and how it relates to the PLT. This meets 4 CEU Minimum Hours OTHER TECHNICAL CLASSES MN Rules 2020.
- Introduction to Fire Alarm Systems. Low Voltage Wiring with a residential emphasis.
Call Today for a free no obligation quote to have us come to you. (763) 413-8217
Our Training Staff can design a specific class based on your specific industry, Just call and we will try to create a class just for you.
PLT Services offers its classes throughout the state of Minnesota. The CE Training for Minnesota AJ, AM, EL, EM, PLT, SSI and RT/RE/RM Technicians.
PLT Services offers on-site classes for companies that prefer to have classes for their employees, customers, or affiliates. We offer customized training at a discounted rate. A minimum of 25 attendee’s is required. Contact us for more information and class options.